PHOTOGRAPHY STUDIO 

This kit has 2 VS-LCD 400w/s digital monolights, one Impact EX100A 100w/s monolight, two white umbrellas, two 10' light stands, one 3' backlight stand, a radio slave transmitter and receiver, and a kit bag to hold everything. Light output can be varied in 1/10-stop stages over a 4-stop range with the VS-LCD. The 100W modeling light can be coupled to the flash, getting brighter or dimmer to match the actual light output, or independently set to the level you want. The monolight accepts Bowens monolight reflectors and head accessories. A built-in optical slave allows the monolight to be triggered using another flash. The EX100A monolight kit adds an additional 100w/s of light and included 24x24" softbox.

The 3' backlight stand can be used on a floor or table. The radio slave transmitter and receiver lets you trigger the strobes without being connected to a sync cord.

Impact Three Light Portrait Backlight Kit (120VAC) Specs
Maximum Watt/Seconds: 400
Guide Number: 197 in ft (60 in meters) @ ISO 100
Recycle Time: 2 sec @ full power
Flash Variability: Full to 1/8 power - 4 stops in 1/10 stop increments
User Replaceable Flashtube: Yes
Changeable Reflector: Yes<
Operating Voltage: 110-120VAC, 50/60Hz
Built-in Slave Cell: Yes, 10 m range
Circuit Protection: Fuse
Fan Cooled: No
Auto Dump: Yes - limited - strobe fires automatically as power is turned down
Dimensions: 11.6 x 8.5 x 6" (29.5 x 21.5 x 15.5 cm) with 6" reflector
Weight: 6.75 lbs (3.06 kg)
This Impact Three Light Portrait Backlight Kit (120VAC) includes:
2 x Impact Digital Monolight 400W/s (120VAC)
Impact One Monolight Kit (120VAC)
2 x Impact White Translucent Umbrella (43")
2 x Impact Air Cushioned Light Stand, Black - 10' (3m)
Impact Two Section Back Light Stand - 3' (90cm)
Impact AC 16 Channel Radio Slave Transmitter
Impact AC 16 Channel Radio Slave Receiver (120/220V AC)